Adjustment of hydraulic winch after installation

After the installation of the hydraulic winch, it needs to be inspected and adjusted, and can only be put into use after testing without any problems. How to check and adjust the hydraulic winch after installation?

1. Open gear transmission, with a tooth clearance of 0.42 millimeters, a contact area along the tooth height of not less than 40%, and a tooth extension length of not less than 50%.

2. Check whether the transmission systems of the working brake are flexible and reliable, and adjust the gap between the brake shoe and the brake wheel to be no more than 0.7-0.8mm when releasing the brake.

3. Check whether the transmission systems of the safety brake are flexible and reliable, and adjust the gap between the brake shoe and the brake wheel to be no less than 1.5mm when releasing the brake.

4. Check whether the control electrical appliances of the working brake and safety brake are interlocked with the main motor, that is, when the main motor is started, the working brake is released, and when the main motor is stopped, the working brake is applied, and only when the safety brake is released can the main motor be started.

After installing the hydraulic winch, everyone must strictly follow the standards for inspection and adjustment to ensure the normal operation of the hydraulic winch. If there are any issues, please contact the merchant promptly for equipment replacement.